Setup Private Docker Registry Kubernetes

  1. Docker Private Registry Setup Kubernetes
  2. Create Private Docker Registry Kubernetes
  3. Setup Private Docker Registry Kubernetes Free

Jan 27, 2020 Storing a Private Docker Registry on FlashBlade™ S3. This is the second post in a multi-part series by Bikash Roy Choudhury and Emily Watkins, where we discuss how to configure a Kubernetes-based AI Data Hub for data scientists. Aug 10, 2020 Read my tutorial to setup you own private Docker registry in a few minutes. Kubernetes works with Docker Containers. Docker Containers need to be provided with a Docker registry. If you don’t want to use a public docker registry for publishing the images of your application, you need to setup a private registry.

User your own private docker registry for development or private/non-public projects.

Docker Setup

Start registry container:

check container:

and version:

Docker private registry setup kubernetes

try to login:

Adjust or create a docker config (use proper ip/netmask):

restart docker:

and log in again:

Kubernetes Setup

Reference: Kubernetes: Pull an Image from a Private Registry

Create a docker configuration file similar to the one you have in ~/.docker/config.json:

Now create a kubernetes secret from this docker-config.json file with:

NOTE: auth is just base64 encoded username:password, e.g.:

and to decode:

Next, on each Kubernetes Node allow insecure registries:

Then restart the docker daemon:

Docker registry cleanup

Log in to the registry container:

then:

Double check (from outside):

Reason: the docker container with the registry does not have Curl installed.

Docker cleanup

Everything

Remove

Remove all non-running containters.

Next remove unused images:

also see: https://gist.github.com/bastman/5b57ddb3c11942094f8d0a97d461b430

See also

We use cookies and related technologies to remember user preferences, for security, to analyse our traffic, and to enable website functionality. Azure Container Registry now supports Azure Private Link, enabling private endpoints from a virtual network to be placed on a registry. Private endpoints are accessible from within the virtual network, using private IP addresses. We recommend using private endpoints instead of service endpoints in most network scenarios. I ran into the same issue when trying to do a pull from a private registry. I tried to install the certificate on the client and didn’t work, so I deleted it, then I realized that if I stop the docker service that is running as a systemd service, and start the docker daemon by hand with dockerd, I’m able to download the images. ECR is configured as a credsHelper and our CI machines used docker login to the private registry. Docker pull works for both registries, but attempting to build an image that references the private registry in the Dockerfile would fail with access forbidden. This is all on Linux machines, no OSX involved.

-->

Azure Virtual Network provides secure, private networking for your Azure and on-premises resources. A service endpoint allows you to secure your container registry's public IP address to only your virtual network. This endpoint gives traffic an optimal route to the resource over the Azure backbone network. The identities of the virtual network and the subnet are also transmitted with each request.

Docker Private Registry Setup Kubernetes

This article shows how to configure a container registry service endpoint (preview) in a virtual network.

Important

Azure Container Registry now supports Azure Private Link, enabling private endpoints from a virtual network to be placed on a registry. Private endpoints are accessible from within the virtual network, using private IP addresses. We recommend using private endpoints instead of service endpoints in most network scenarios.

Configuring a registry service endpoint is available in the Premium container registry service tier. For information about registry service tiers and limits, see Azure Container Registry service tiers.

Preview limitations

  • Future development of service endpoints for Azure Container Registry isn't currently planned. We recommend using private endpoints instead.
  • You can't use the Azure portal to configure service endpoints on a registry.
  • Only an Azure Kubernetes Service cluster or Azure virtual machine can be used as a host to access a container registry using a service endpoint. Other Azure services including Azure Container Instances aren't supported.
  • Service endpoints for Azure Container Registry aren't supported in the Azure US Government cloud or Azure China cloud.

Important

  • Azure Security Center can't currently perform image vulnerability scanning in a registry that restricts access to private endpoints, selected subnets, or IP addresses.
  • Instances of Azure services including Azure DevOps Services, Web Apps, and Azure Container Instances are also unable to access a network-restricted container registry.
  • Certain other Azure service instances can securely access a network-restricted container registry. For more information, see Allow trusted services to securely access a network-restricted container registry.

Prerequisites

  • To use the Azure CLI steps in this article, Azure CLI version 2.0.58 or later is required. If you need to install or upgrade, see Install Azure CLI.

  • If you don't already have a container registry, create one (Premium tier required) and push a sample image such as hello-world from Docker Hub. For example, use the Azure portal or the Azure CLI to create a registry.

  • If you want to restrict registry access using a service endpoint in a different Azure subscription, register the resource provider for Azure Container Registry in that subscription. For example:

Create a Docker-enabled virtual machine

For test purposes, use a Docker-enabled Ubuntu VM to access an Azure container registry. To use Azure Active Directory authentication to the registry, also install the Azure CLI on the VM. If you already have an Azure virtual machine, skip this creation step.

You may use the same resource group for your virtual machine and your container registry. This setup simplifies clean-up at the end but isn't required. If you choose to create a separate resource group for the virtual machine and virtual network, run az group create. The following example assumes you've set environment variables for the resource group name and registry location:

Private

Now deploy a default Ubuntu Azure virtual machine with az vm create. The following example creates a VM named myDockerVM.

It takes a few minutes for the VM to be created. When the command completes, take note of the publicIpAddress displayed by the Azure CLI. Use this address to make SSH connections to the VM.

Install Docker on the VM

After the VM is running, make an SSH connection to the VM. Replace publicIpAddress with the public IP address of your VM.

Run the following commands to install Docker on the Ubuntu VM:

After installation, run the following command to verify that Docker is running properly on the VM:

Output:

Create Private Docker Registry Kubernetes

Install the Azure CLI

Follow the steps in Install Azure CLI with apt to install the Azure CLI on your Ubuntu virtual machine. For example:

Exit the SSH connection.

Configure network access for registry

In this section, configure your container registry to allow access from a subnet in an Azure virtual network. Steps are provided using the Azure CLI.

Add a service endpoint to a subnet

When you create a VM, Azure by default creates a virtual network in the same resource group. The name of the virtual network is based on the name of the virtual machine. For example, if you name your virtual machine myDockerVM, the default virtual network name is myDockerVMVNET, with a subnet named myDockerVMSubnet. Verify this by using the az network vnet list command:

Output:

Use the az network vnet subnet update command to add a Microsoft.ContainerRegistry service endpoint to your subnet. Substitute the names of your virtual network and subnet in the following command:

Use the az network vnet subnet show command to retrieve the resource ID of the subnet. You need this in a later step to configure a network access rule.

Output:

Change default network access to registry

By default, an Azure container registry allows connections from hosts on any network. To limit access to a selected network, change the default action to deny access. Substitute the name of your registry in the following az acr update command:

Add network rule to registry

Setup private docker registry kubernetes windows 10

Use the az acr network-rule add command to add a network rule to your registry that allows access from the VM's subnet. Substitute the container registry's name and the resource ID of the subnet in the following command:

Verify access to the registry

After waiting a few minutes for the configuration to update, verify that the VM can access the container registry. Make an SSH connection to your VM, and run the az acr login command to login to your registry.

You can perform registry operations such as run docker pull to pull a sample image from the registry. Substitute an image and tag value appropriate for your registry, prefixed with the registry login server name (all lowercase):

Docker successfully pulls the image to the VM.

This example demonstrates that you can access the private container registry through the network access rule. However, the registry can't be accessed from a login host that doesn't have a network access rule configured. If you attempt to login from another host using the az acr login command or docker login command, output is similar to the following:

Restore default registry access

To restore the registry to allow access by default, remove any network rules that are configured. Then set the default action to allow access.

Remove network rules

To see a list of network rules configured for your registry, run the following az acr network-rule list command:

Setup Private Docker Registry

For each rule that is configured, run the az acr network-rule remove command to remove it. For example:

Allow access

Substitute the name of your registry in the following az acr update command:

Setup Private Docker Registry Centos

Clean up resources

Setup Private Docker Registry KubernetesPrivate

If you created all the Azure resources in the same resource group and no longer need them, you can optionally delete the resources by using a single az group delete command:

Setup Private Docker Registry Kubernetes Free

Set Up Private Docker Registry Centos

Next steps

Setup Private Docker Registry Kubernetes

  • To restrict access to a registry using a private endpoint in a virtual network, see Configure Azure Private Link for an Azure container registry.
  • If you need to set up registry access rules from behind a client firewall, see Configure rules to access an Azure container registry behind a firewall.